If you’ve ever hit the open road, you may have experienced trying to drive while your motorcycle helmet visor is fogging up. When that happens, it's dangerous to navigate, but it can also be prevented. Motorcycle driving with a helmet is meant to provide the driver with a safe but exciting ride while on the road.

One of the best things about driving a motorcycle is being able to feel the wind in your face while traveling down an open road. It would help if you didn’t have to wipe off your motorcycle helmet visor every few miles while taking that ride. That’s why you can now deploy several different methods in eliminating the fog that concentrates on your visor.

Read the guide below if you’re interested in riding a motorcycle while experiencing an unrestricted view.

The Benefit of Using a Motorcycle Helmet

The motorcycle helmet has been in existence for several decades. It’s only in the past few decades safety protocols and laws have concerned themselves with helmet visor safety issues.

Statistically, you reduce the risk of suffering an injury or death by nearly 22% to 33% compared to not wearing a helmet.

That’s why, when riding, you want to have a motorcycle helmet visor that lowers that statistic and not adds to it. Malfunctioning motorcycle helmet visors are a danger to the driver, passenger, and possibly any other vehicle you may not be able to see correctly.

Thankfully, there are methods you can use that will help keep your motorcycle helmet visor clear.

How to Stop a Motorcycle Helmet Visor From Fogging Up

The informative tips below will offer up some helmet visor fog solutions that will enhance your ride and help keep you safe. As an added benefit, the solutions below will also improve your motorcycle ride experience because you’ll be able to see the beauty that surrounds you as you ride.

Inserts That Perform Anti-Fog Solutions for Motorcycle Helmet Visors

Clear plastic sheets make up anti-fog inserts. The plastic sheets adhere to the interior of the visor. The plastic sheets prevent the fog due to its hydrophilic layer that absorbs moisture, allowing you to see everything in the most transparent possible light.

There are multiple versions of the anti-fog insert solution.

Pin-Lock Insert Version of the Anti-Fog Solution

The pin-lock insert provides the helmet visor with a double-glazed effect. In essence, it helps keep the helmet visor at a constant temperature. Because the temperature stays the same in or outside the visor, you can keep your visor closed even on the most terrible rainy days.

The pin-lock has a silicon edge that helps seal the bond between the visor and the insert. The pin-lock lens is made of organic and transparent material, helping to prevent moisture from getting into the helmet or visor.

Not all helmets have pin-lock shields, but you can buy them separately.

Anti-Fog Spray for Motorcycle Helmet Visors

There is probably no easier way to keep fog off your motorcycle helmet visor than having a spray that does it for you. You have to keep a consistent schedule in spraying the helmet visor, but you’ll notice the difference almost immediately if you do.

Almost all of them use a chemical surfactant that helps break down the water tension concentration inside your helmet and visor. The anti-fog spray should be used every time you ride, especially if you’re riding in the rain.

Anti-Fog Coating for Motorcycle Helmet Visors

There’s no doubt that anti-fog coating is a more permanent solution than the spray. The coating layer can even last for months and sometimes years. You don’t have to worry about spraying it on because helmet manufacturers do that for you.

Motorcycle helmet manufacturers use hydrophilic ingredients when they are attempting to prevent and eliminate helmet visor fog.

Anti-Fog Wipes for Open Shields

Think of anti-fog wipes for motorcycle helmet open shields as wet wipes that clean up the collected grime on your visor. The extra benefit of anti-fog wipes is that it eliminates and stops fog from accumulating on your helmet visor from the start.

Anti-Fog Masks for Helmet Visors

Long before COVID-19, motorcycle drivers and riders were wearing masks. A special anti-fog mask can help prevent your helmet visor from fogging up. It does this by using a neoprene mask that covers your mouth and nose.

The mask helps prevent your visor from fogging up because it filters all the pollution through the mask that keeps the visor clear and smelling clean.

The Benefits of Helmet Visor Anti-Fogging Solutions

These anti-fogging solutions will help keep you safe and fog-free. Some will argue that you can always open your visor up if the fog gets too bad. But by doing that, the chances of bugs, debris, or anything else on the road hitting your face or eyes goes up exponentially.

When you’re riding at fast speeds, it stands to reason that you’re putting yourself, your face, and your head more at risk by driving with your visor up.

On Your Next Motorcycle Ride Use the Right Anti-Fog Solution for You

Most motorcycle helmet visors today offer anti-fogging solutions. In fact, motorcycle helmet manufacturers now include anti-fog solutions like pin-locks or coatings on your helmet visor. If you are riding around without an anti-fog motorcycle helmet visor on your head, you need to consider your options.

One of the best options is to reach out to Xtreme Helmets when you’re ready to make a difference on your next motorcycle ride.

The next time you ride, consider how you can better enjoy the ride by using an anti-fog solution that Xtreme Helmets can provide you. We'll take the time to answer your questions and find anti-fog solutions that fit your needs best. Why would you go anywhere else?